MENU

GLOBEGAS

GLOBEGAS ENGINEERING SDN BHD (GESB) with company registration no 626046-A was setup based on experience, professionalism, cooperation and commitments. Our company have been established on 25 August 2003 with 100% bumiputra status, to work with engineering work of gas piping system installation which covering Liquid Petroleum Gas (LPG) and Natural Gas (NG) beside civil and maintenance works.

Our related work is including of Consulting, Designing, Submission, Construction, Modification, Servicing & Maintenances, Requalification Tanks, Renewal Private Gas License, Auditing, Testing and Commissioning of Piping Reticulation (LPG / NG / NGV /LNG / BIOGAS/ Other Gases / Fuel system). Parameter involve are cover Infra system, domestic, commercial and industrial application such Government Bodies, Private Sector ex; Plant, Industrial, Factories, Developer, Shopping Mall, Mix Development, Hotels, Schools, Universities, Condominium, Apartments, houses unit, to few names.

GESB was develop through knowledge and experience of the staff and management for among 19 years in gas pipeline and 10 years in civil work involving light to medium industries. Thus, we are familiar in all type of constructing line even in ISO work.
GESB has operate with adequate skilled and professional staffs specializing in gas and civil work. We are able to solve any problem related with gas line and always to make sure it’s followed the regulation and requirement.

GESB also have their own welder and competence person which certified and qualified by JKKP and Suruhanjaya Tenaga (ST). We are be able and familiar to liaise with JKKP, ST, Gas Malaysia Bhd, BHP Marketing Sdn Bhd, Petronas NGV S/B, Petronas Dagangan Berhad, Consultant Firm, Main Contractor, Developer, Owner or other related parties.

In the Moment, GESB has been registered with Suruhanjaya Tenaga (Gas), JKKP, BHP, Petronas, Gas Malaysia Bhd, Lembaga Pembangunan Industri Pembinaan Malaysia (CIDB), Pusat Khidmat Kontraktor (PKK), Kementerian Kewangan (MOF), KPDNKK (PDA for LPG Bulk supply) and at the same time, we toward to registered with other bodies.

Safety Tips of The Day Regrading LPG

CYLINDER USED FOR THE END USER

  • When the cylinder is received, please make sure the cylinder is well cap (Company seal and safety cap intact).
  • If you are not sure about safe use of LPG, ask the delivery person for a demonstration
  • Make sure cylinder is position in upright
  • The storage location shall be at well-ventilated area and away from ignition sources / fire / heat
  • When LPG cylinder store in the cabinet, make sure the area are well ventilated and there is no electrical switch and no flammable material. The ventilation for door’s cabinet must be locate at bottom part since LPG is heavier than air in case of leakages
  • Use an approved regulator and suit with the appliances supply pressure.
  • Domestic user usually use the low pressure regulator with 0.5Psi of outlet setting pressure. The hose use connection to the appliance must be approved type and secure properly with the hose clip. The low pressure hose shall comply with BS 3212
  • The commercial user usually uses high pressure regulator with 5psig of outlet setting pressure. The hose connection to the appliance must be approved type and secure properly with hose clip. The high pressure hose shall comply with BS 3212-2 or MS 773 or MS 2086
  • The connection shall frequently check against leakage by apply the snoop or soap water to the hose, burner connection, cylinder connection and regulatory body. Highly recommend to carry out every weekly.
  • The installation or any rectification works shall only be carried out by train person.
  • When there is a leakage, make sure to take safety measure by stop the cooking, secure the leakages, ventilate the area by open the window / exhaust ventilation. If the cylinder leakage, bring it to outside building and put away from any ignition source. Contact the dealer / distributor to arrange for emergency service / troubleshooting.
  • The old cylinder shall return to supplier to avoid seat valve / rubber valve passing
  • Get your gas appliances serviced periodically by train person / vendor. Self-repair is unsafe.
  • Remember to turn ‘off’ the regulator knob and then the stove knob every night, or when not in used
  • Never keep kerosene or other stoves on the floor where an LPG cylinder is in use
  • LPG being heavier than air, tends to settle at the ground level on leakage. If leakage is noticed, use all available ventilation to disperse the gas
  • Never leave gas cylinder / burner unattended– the content may overflow, extinguishing the flame and causing gas leakage
  • Do not panic when facing cylinder leak / fire. Use a fire extinguisher from upwind to stop the fire. In other method, use a wet cloth to stop the fire by cover up the leakage valve and stop the fire. Bring out the cylinder to outside

 

 CENTRALIZED LPG PIPING FOR END USER

  • When the cylinder is received, please make sure the cylinder is well cap (Company seal and safety cap intact).
  • If you are not sure about safe use of LPG, ask the delivery person and installer for a demonstration
  • Make sure cylinder is position in upright
  • The storage location shall be at well-ventilated area and away from ignition sources / fire / heat
  • Make sure to storage for the LPG cylinder located at outside building. The storage room shall be manage by Orang Bertanggungjawab only and it must be locked
  • The cylinder shall connect to the manifold and regulate down the supply pressure according to by Suruhanajaya Tenaga / JKKP.
  • The approved supply pressure for domestic and commercial building shall not over than 5 psig
  • The approved supply pressure for industrial building shall not over than 20 psig
  • The piping and accessories used shall be an approved type and it must getting the installation & operation approval from Suruhanajaya Tenaga / JKKP (trough ATI, ATO, PTI,PTO)
  • The cylinder used for commercial / industrial application shall be non-subsidized type. The gas shall be buy from authorized dealer, licence under PDA 4, KPDNHEP
  • The commercial storage can be used ether cylinder, pig tank / baby tank and bulk tank. The tank designed under ASME code shall be qualified and valid through PMT registration by JKKP
  • The storage and location must be comply according to latest MS830
  • The piping to the equipment must be installed according to latest MS90
  • The reticulation system must comply with Gas Supply Act (act 501) and Gas Regulation 1997
  • The centralized piping to the kitchen shall provide with individual main valve and pressure gauge. The valve shall be closed after operation hour
  • Each equipment’s shall provide with termination valve for maintenance / repairing works
  • The installation or any rectification works shall only be carried out by train person.
  • When not using gas for long period, the main valve at gas storage shall be closed
  • The piping, gas burner and accessories shall carry out a frequent service and maintenance to avoid leakage /system failure
  • The complete system shall carry out an inspection by gas competence person. Domestic installation shall be inspect at least once every 3 years, while a commercial or industrial installation must be inspect at least once every 2 years
  • The centralized piping system shall get a valid gas license
  • The emergency valve provide at main pipe or LPG storage area can be used to total shut off the LPG supply to building in case of emergency

 

Table of Contents